Midea MAP12S1TGR-S Air Conditioner Manual

The Midea MAP12S1TGR-S is a 12,000 BTU portable air conditioner designed for efficient cooling and comfort. It features a sleek design, easy-to-use controls, and multiple modes including cooling, dehumidifying, and fan. The unit is equipped with a remote control, programmable timer, and adjustable thermostat to ensure optimal temperature settings. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating the Air Conditioner 8. Maintenance and Care 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: 12,000 BTU cooling capacity, remote control, programmable timer, adjustable thermostat, and multiple fan speeds.

Feature	Description
Cooling Capacity	12,000 BTU for effective cooling in rooms up to 400 sq. ft.
Remote Control	Convenient control from a distance.
Programmable Timer	Set the unit to turn on or off at specific times.
Adjustable Thermostat	Customize your comfort level.
Multiple Fan Speeds	Choose from low, medium, or high settings.
Dehumidifying Mode	Reduces humidity levels for added comfort.
Easy Installation	Includes window kit for quick setup.
Energy Efficient	Designed to save energy while providing optimal cooling.

Installation

Unpack the air conditioner and inspect for any damage. Follow the instructions for proper installation.

Choose a suitable location near a window for venting.
Install the window kit according to the instructions provided.
Connect the exhaust hose to the unit and the window kit.
Plug the unit into a grounded outlet.

WARNING! Ensure the unit is stable and secure to avoid accidents.

First-Time Setup

Power on the air conditioner and follow the on-screen prompts.

Select the desired mode: cooling, dehumidifying, or fan.
Set the temperature using the remote control or control panel.
Adjust fan speed as needed.
Program the timer for automatic operation.

CAUTION! Ensure the unit is properly installed before use.

Specifications

Cooling Capacity: 12,000 BTU.
Power Supply: 115V/60Hz.
Energy Efficiency Ratio (EER): 12.0.
Air Flow Rate: 300 CFM.
Noise Level: 52 dB (low speed).
Weight: 70 lbs.
Dimensions: 30 x 18 x 15 inches.
Refrigerant: R410A.

Controls and Settings

Access settings via the control panel or remote control. Key controls include power, mode selection, temperature adjustment, and fan speed.

Remote: Power, Mode, Temperature Up/Down, Fan Speed, Timer.

Settings: Adjust cooling mode, set temperature, and program timer for convenience.

Connecting Devices

The air conditioner does not require additional devices for operation. Ensure proper installation for optimal performance.

Ensure the unit is plugged into a suitable outlet.
Follow installation instructions for venting.
Use the remote control for operation.

Tip: Keep the area around the unit clear for optimal airflow.

Operating the Air Conditioner

To operate, power on the unit and select your desired mode.

Press the power button to turn on.
Select cooling, dehumidifying, or fan mode.
Adjust the temperature and fan speed as needed.
Use the timer function for automatic operation.

WARNING! Do not block the air intake or exhaust.

Maintenance and Care

Regular maintenance is essential for optimal performance. Clean or replace the air filter monthly.

CAUTION! Unplug the unit before performing any maintenance.

Regulatory Information

This product complies with applicable regulations for safety and efficiency. For support, visit www.midea.com or contact customer service.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Unit does not turn on	Power supply issue	Check power connection and outlet.
No cooling	Incorrect mode or low refrigerant	Ensure cooling mode is selected; contact service if refrigerant is low.
Excessive noise	Improper installation	Check for loose parts or improper placement.
Remote not working	Batteries	Replace batteries in the remote control.
Water leakage	Clogged drain	Check and clear the drain line.

Reset: Unplug the unit for 5 minutes to reset.

Service: For assistance, contact Midea customer service.